BACK

3) TOOLS & SHOP   (all items are located in Chatsworth)

1) Wrenches: Pipe, 24", straight jaw, iron, Craftsman 5567 & Ridgid 24.  Both for $75.  (1192)

 

 
2) Wrenches: Pipe, 36", iron, Craftsman 5567 straight jaw & Ridgid E36 angled jaw. Both for $175. (1191)

 

3) Wrench:  Reversible Jaw Chain Pipe Wrench, 1-1/2" - 8" pipe capacity, 51" long with 40" chain, J.H. Williams Vulcan 34 (McMaster- Carr #5366A16 @ $500).  $350  (0904)

 

4) Cabinet: Machine, 24" deep x 18" wide x 38" high, 1 drawer, top has drain system into filter basket and sump (apparently used as a stand for a machine requiring recirculation cutting oil), heavy construction. $65.  (1190 )
 
 

5) Tripod: Welded steel, takes 1-1/2" pipe legs inserted into tripod to create any desired height, $35 (1188)

 

6) Rotary Base: For 6" Mill Vise: Kurt model, new.  $150.
 

7) Angle Plate: 12" x 12" x 12" x 1-1/4", machined cast iron, 2 ribs, solid faces (no slots or holes), unused. $175.  (1163)

 

 

 

 

 

 

8) Raychem HT-900B Compressed Air/Nitrogen Heating Tool. $1800

 
 

 

 

 

 

 

9) Surface Plate: Granite, 18" x 24" x 3" with 2 ledges, Grade A (+/- .00007"), perfect condition,  $200.  Another one in used condition, $100  

 

 

 

 

10) Reamer: 1-1/4 NPT pipe, square drive, new. $50

11) Oxy-Acetylene Torch Set: Portable, mini-style in tote carrier, 10 cuí oxygen tank, 8 cuí acetylene tank, hoses, mixing handle, regulators (need repair). No tips. $150

12) Sander/Polisher: 6" Craftsman 2-speed disc power tool.  Has 6" rubber sanding pad & new sheep skin buffing cover. $45

13) Nails: 8d power nailer sticks, approx. 2000 . $15

14) Taps: 1/4"-24H3 x 4 flute plug hand taps, new. $5 each

15) Hydraulic Ram: 2-1/2"OD cylinder, 1-1/2"D rod, 25" eye to eye, approximately 16" travel, 2- speed pump, came off engine hoist. $75

 

16)Tool holders: Cat 40 x TG100 x stub length, collet chucks, ball bearing nuts, Command C4C4-1000, excellent condition, (2).   1/2" drive torque wrench adaptor.  All for $175. 

 

 
 

17) SPC Printer: Mitutoyo Digimatic Miniprocessor. Model DP-10X, #264-501, gives printout of micrometers and other precision measuring instruments having an SPC output. $225

18) TRAK TRM Tool Room Bed-Type Milling Machine: 1992, S/N 92-124, 2-axis CNC or manual table operation, hand quill, tilting variable speed head, DRO readouts on X,Y, and spindle Z. Remote control switch. 3 hp. 220 or 440 volt 3-phase. Fitted with incredible custom aluminum 20" x 43" x 3" table top with T-slots and threaded holes. Speed-Rite push button pneumatic power draw bar assembly with tool holder installation guide. Draw bars for ANSI and Cat 40 tool holders. Built-in flood coolant system. Wesco mist cooling. Bijur lubrication system. Private owner. Excellent condition. $14,500

 

19) DRO Parts: Acu-Rite Digital Read Out components for machine tools.

20) Leak Detector: Snap-On brand, model AC6500 receiver and model 6501 transmitter in fitted case with instructions.   Appears unused. Detects vacuum leaks and window leaks on cars.  $175



21) Welder Gas Control: National Standard, Inert Gas Control for TIG & MIG production welding, new. 2 @ $50 each

22) Lathe Tool Post: Colchester 15". 4 sided, new. $175

22) Stressproof 1144 Steel: 2-1/4"D & 2-3/8"D remnants up to 15" long. $1/pound

23) Drill Motor Conversion Stand: Converts a small electric drill motor into a mini-drill press. $10

24) Shop-Vac: Small, 5 gallon, Shop-Vac Model 500, wet/dry, 2-1/4"D ports. $10

25) Shop-Vac: Small, 6 gallon, Hoover Model S6529, wet/dry, 2-1/4" ports. $15

26)

27) Shop-Vac: Sears wet/dry vacuum, small tank. $15

28) Folding Work Stand: 1'x3' work surface, folding steel legs. $20

 

 29) NMTB End Mill Holder: 3/4" size, 40 taper, 2-5/16" projection, 1-7/8" nose diameter.  Carbaloy #NMTB40-EM .0750.  Cost $145. Sell for $75

 

 

 


30) Car Waxer: Wenn model 10T3, 10" random orbital hand power waxer & buffer. $25

31) Grooving/Threading Tools: Lathe tooling, Manchester brand, miscellaneous 1" holders & components. Cost over $600. $300

 32) Box Turning Tool: Lathe accessory, R&L #1, roller back rests, 3/4" shank. $250

 33) Thread Chasers: 3/8"-16 thread for Geometric 1" die head. $75

34) DRO Scale: Bausch & Lomb Accu-Rite AR-1, .0001" resolution x 36" travel, works with Bausch & Lomb or Accu-rite or Analam English readers , cost $1352, new in box. $850
 

35) Helium Regulator/Filler: $35 (have several)

 36) Work Light: 1300 watt, 3 quartz, lights on tripod. $35

37) Durometer: Pandux model 360, tests soft materials to determine hardness on Shore A scale from 0 to 100, in case with instruction sheet. $175

  

38) Dust Blower: 3" diameter inlet and outlet.  Used to pull dust  out of machine tools.  Couples directly to an electric motor (not included).  $20 (Chatsworth)

 

39) Floating Reamer Chuck: Rohm/SMP model 311-00 type 122, ID #017274, #2 Morse tapers, provides compensation for angular misalignment of reamers. The holder is new in fitted wood box with papers. Cost $2000. Sell for $1400

40) Box Turning Tool: Use on lathe or mill to turn round stock. Has adjustable rollers to support stock against flexing. Takes 3/8" square tangential cutting bits. Accepts 3/16" to 5/8" diameter stock. Made by Hill in England. Same as Boyer-Schultz Model "T" (0RT) #5140. New in box. Cost $600. Sell for $350.

41  Vibrator/Shaker: 2-3/4" x 4" x 7-1/4", 110VAC, bolts to side of container or hopper to create shaking motion to help material feeding. $20 (Chatsworth)

42) Air Filter/Regulator: Wilkerson model C04-01-M00 (now BB3-01-FL00), all-in-one miniature combination filter and regulator, adjustable up to 200 psi rating, 1/8" pipe ports, brass body, rated 16 CFM, about 6" length, new in the box. $40

 43) Micrometer: Indicating, Etalon brand, SPI #12-107-9.  0-1" range by .0001".  Dial gage reads +/- .020".  Also known as a "super-mic" or "snap-mic".  High precision and high Swiss quality. In fitted hard case with tools.  As new.  Sells new for over $1000.  $750 (Chatsworth)

 

 
44) Bolt Cutters: Heavy duty.  42" long.  5/8' capacity in mild steel.  Jaws in excellent condition. Made in America by H.K. Porter. Includes new spare jaws and new cutter head for 1/2" hard steel.  $350

 

 
45)  Threading Die Head:  Like Geometric only better.  For lathes.  Designed by Douglas Aircraft then the design and patents were  sold to Brown &Sharpe for manufacture, then to Regal-Beloit, then to Threading Equipment Co.  It was the best threading die head ever made.  It uses #100 series H&G inserts in carriers.  It was probably just too expensive.  Pull off and push off modes.  This head is in new condition as it has never been used.  3 of the 4 carriers are missing.   Cost $3500. $450  
 
46)This is a heavy steel frame table with a fire brick surface.  It is primarily used used when doing work with an oxy/acetylene torch and creating a lot of heat.  27"W x 18-1/2"D x 35"H.  $50 (Malibu)